EMT Conduit And Liquid tight Connectors

EMT Conduit
Our commitment to superior design and quality is most evident in our self-manufactured (Made in China) line of EMT Compression Connectors and Couplings. China Fittings features EMT conduit fittings that connect and bond electrical metallic tubing to a box or enclosure or, couple two ends of EMT conduit.

• Compression and Set Screw Connectors and Couplings are fabricated from the highest quality screw machined steel, and brightly zinc plated for corrosion resistance.
• All connectors are available with or without an insulated throat. The nylon insulator is a UL component that protects conductors, decreases wire-pulling effort, and averts thread damage during handling.
• Connectors are also standard with a locknut to aid in bonding between the fitting and box or enclosure. Designed with a superior steel construction and precise clean threads, locknuts will tighten without distortion and will not loosen from vibration.
• All EMT fittings carry a concrete tight listing. 1/2¡± to 2¡± EMT Compression are also UL rain tight.
• Set screw fittings provide a concrete tight connection when taped.

Liquid tight Connectors
China Fittings¡¯ commitment to superior design and quality workmanship is most evident in the manufacture of our Liquid Tight Connectors. The product is designed for indoor or outdoor locations where continuous or intermittent moisture is present and positively bonds conduit to a box or enclosure. Together, the flexible metallic conduit and fittings protect conductors from damage due to excessive vibrations and contaminants, such as, moisture, oils and dust.

• Fittings are available in straight, 45¡ã, and 90¡ã configurations, with or without insulated throats. Reusable and Permanent fittings are also available.
• Liquid Tight Connectors are suitable for industries and equipment; including machinery and tools, petroleum, food processing, chemical, waste water treatment, HVAC, aerospace, electric power, paint, automobile, paper mills, pumps, etc.
• Meets UL and NEC requirements for use in wet and hazardous locations.
• Connector bodies and nuts are fabricated from the highest quality steel for industrial grade impact resistance.
• Steel or Aluminum Ferrules facilitate sealing and grounding. Ferrules can be purchased separately.
• Polyethylene Sealing Washers resist dampness and are available separately.
• Liquid Tight Connectors are also available in zinc die cast.
• Liquid Tight Combination Couplings are available for roof top HVAC. These couplings are utilized in connecting both thinwall and heavywall conduit to liquidtight flexible metal conduit and are offered with a reusable or permanent ferrule.
• Liquidtight Flexible Metal MS Connectors with internal threads to accept AN-MS connector shells are presented in steel.